In feed mills, it is common to grind ingredients into very fine powder before making shrimp feed. The idea is simple: smaller particles should be easier to digest, so shrimp should grow better. But fine grinding costs money. It takes more time, more energy and special machines. A new open-access study from Auburn University, Cargill and Kansas State University asked whether this extra effort is really needed when the feed is made by extrusion.
The researchers took one commercial shrimp feed formula and ground it to five different sizes, from very fine (about 100 µm) to fairly coarse (about 700 µm). All five versions were then extruded in the same way into small sinking pellets about 2 mm wide. They fed these diets to Pacific white shrimp (Litopenaeus vannamei) for eight weeks in two different setups. The first was a biofloc system, where small juvenile shrimp of about 0.4 g were stocked at high density. The second was a green water system designed to copy pond conditions, using larger shrimp that started at about 4.3 g.
The result was clear. Grind size made no real difference. In the biofloc trial, shrimp reached between 17 and 18.5 g, with feed conversion ratios between 1.37 and 1.46. In the green water trial, shrimp grew to between 28 and 29.4 g, with feed conversion ratios between 1.19 and 1.28. Survival, body protein, body fat and energy retention were also similar across all five diets. In short, the shrimp grew just as well on coarsely ground feed as on finely ground feed.
Why does this happen?
The answer lies in how extruded feed is manufactured. During extrusion, the feed mix is exposed to heat, moisture and strong mechanical force at the same time. This turns the mix into a kind of melt, where starch is cooked and proteins change shape. In this process, the original particles break down and blend together, so their starting size matters much less.
This is different from ordinary pelleting, which mostly presses the ingredients together. In pelleted feed, the particles keep their original size, which is why older studies on pelleted shrimp feed did find that grind size affected growth.
What does this mean for the industry?
For extruded shrimp feed manufacturers, this study suggests that grinding ingredients very finely may not be worth the extra cost and energy, at least within the 100 to 700 µm range tested. This could help mills save money, speed up production and lower energy use without affecting shrimp performance.
The study tested only one feed formula and did not directly measure digestibility, and it was supported through a technical agreement between Cargill and Auburn University. The authors suggest that a digestibility trial would be a useful next step.
Read the full paper (open access): San Andres, C.F., Bajracharya, S., Rhodes, M.A., Rugroden, P., Alavi, S. & Davis, D.A. (2026). Effects of particle grind size in extruded diets on Pacific white shrimp Litopenaeus vannamei growth performance. Aquaculture International, 34, 277. 🔗 https://doi.org/10.1007/s10499-026-02673-1
#MaverickMiniBytes #Aquaculture #ShrimpFarming #PacificWhiteShrimp #Litopenaeusvannamei #AquaFeed #ShrimpFeed #FeedTechnology #Extrusion #FeedManufacturing #ShrimpNutrition #Biofloc #SustainableAquaculture #AquacultureResearch #FeedEfficiency Auburn University Kansas State University Cargill Animal Nutrition & Health D. Allen Davis Aquafeed.com INVE Aquaculture Albert Tacon Alberto Nunes International Aquafeed Aung Tun Aye Dominique Bureau Wittaya Aqua U.S. Soybean Export Council (USSEC) National Aquaculture Group | NAQUA AquaCulture Asia Pacific
Maverick Mini-Bytes Turning Animal Nutrition Research into Practical Insights.